The red LED will illuminate when the lock enters Remove mode.Įven though the lock is sleeping, all buttons are active and can be used to initiate any lock activity.įor the RF side, it will wake up every 1 second to check if there are any requests from your smart home controller. When prompted by the system, press button A” on the lock interior once. Please allow time for the controller to add the lock to your system.įollow your smart home system’s instructions to remove the lock from the network. The red LED will illuminate when the lock enters Add Mode. When prompted by your smart home system to add the lock, press button “A” on the lock interior one time. Initiate the process to add the lock to your system at your smart home controller. Supports Z-Wave SmartStart allowing you to setup the product simply by scanning its QR code via.Firmware updatable via a compatible Z-Wave gateway.Kwikset describes SmartCode 888 as having the following features: The following security modes are directly supported: This will re-engage the clutch.Īlign the turnpiece with the torque blade and reinstall the interior assembly on the door.As a Z-Wave Plus certified product, SmartCode 888 supports Z-Wave S2 security. Rotate the turnpiece 180° clockwise (you will need to use force when rotating the turnpiece, and you will hear it click). Place the battery cover onto the interior assembly, making sure to align the turnpiece with the shaft. If it cannot rotate to the vertical position, the clutch has become disengaged. Attempt to rotate the turnpiece on the interior assembly to the vertical position. Verify that the lock can be operated smoothly with the key while the interior is removed. Remove the interior assembly from the door. Make sure the latch bolt can operate smoothly with the key and reinstall the interior assembly. If it is still unable to rotate, loosen the screws on the mounting plate and reposition the plate so there is no tension on the cylinder torque blade. If it is unable to rotate, remove the interior assembly from the mounting plate.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |